Title |
Publisher |
Price ▲ |
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A double wide timber post and a solid center post. I made these for my friend, Lou Anders becuase he had a need for them. The double wide post is good for shoring up wall connections. The center post is good for a support in a large room. The picture shows the double wide post. Both use the rounded pegs to secure them to floor tiles.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Looked in Gaoler Lous, and in Forum Prisons and couldnt find this, so I made it because I needed it, shared it in case someone else needed it. Does not include the doors, just the floors.
Doors and other walls can be found here:
https://www.drivethrurpg.com/product/242012/Best-of-the-Forums-Prison-Cells?term=forum+prison&test_epoch=0 ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is just something I made while learning sculpting tools, I plan to release more random things I make as i make and refine them, you guys can just have fun with them. update: added "Alien Saucer" this only contains a single STL currently released The haunted painting can be printed but must be on the high detail settings and have your printer dialed in: note the fingers, horns and teeth tend... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
I needed a way to add variety to my cavern waterways. Included are two diagonal cut water tiles, one a bit more narrow than the other. Enjoy! ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A elevated to lower waterfall transition requested by Jeff Kazules. May be more added to this in the future. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is trapdoor base on a castle floor tile.
*This does not include the standard trapdoor or the frame included in the Fat Dragon Games Tower Set.
Clips can be found here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346 ... [click here for more] |
Fat Dragon Games |
$0.99
|
Included in this set are 9 custom remixed tiles combining elements from Fat Dragon Games Starter set, Expansion 9, and Villiage 1 set. These doors were requested by my friend @ammulder on the FDG Forums for use as "secret" doors that are clearly visible from one side. They are free to the community in celebration of Fat Dragon Games Kickstarter 3.
Each door tile prints in one solid piece and will... [click here for more] |
Fat Dragon Games |
$0.99
|
Includes a normal height and half height remixed curve wall from Fat Dragon Games Dungeons. This set is great for the exterior of buildings where you don't want a tile edge.
... [click here for more] |
Fat Dragon Games |
$1.00
|
Bill requested some four inch doorways. Here are 4 variations. Regular Flat Wall, Left Corner, Right Corner, Two Corners. Each piece contains an optional center clip space, where you can run a narrow passageway off from it if you'd like. ... [click here for more] |
Fat Dragon Games |
$1.00
|
The caverns needed better corners to work with water. So I made some.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$1.00
|
Print Area Envy Dice tower top. Someone out there still just has the mini select like me and needs a top for the GM Screen of Doom Dice Tower. Thats what this is. It's still slightly larger than the tower to give it that finished look, but fits on your print bed. So, whether you are in a similar boat, or are looking for a variant, or just want a top that will take slightly less time to print. This... [click here for more] |
Fat Dragon Games |
$1.00
|
These 2x2 risers are designed to support the 4x4 Woodland and Riverside sets, including the new Riverside Waterfalls Set. Some of the cliffs and falls have unique heights. This set should provide proper support with any combination. These risers should support most FDG 4x4 tiles.
See Preview Here:
Recommended Print Settings are .2mm layer height and 10% infill, using the FDG terrain profile.
Cheers!... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this title are stl models for 6x6 and 8x8 Dungeon and Cavern (revised) floors. For use with Fat Dragon Games Dragonlock terrain systems. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are 34 STL files corresponding to the status effects of the 5th Edition Dungeons and Dragons game.
Advantage, Charmed, Disadvantage, Deafened, Fatigued, Frightened, Grappled, Incapacitated, Invisible, Paralyzed, Petrified, Poisoned, Prone, Restrained, Stunned, Unconscious, Exhuasted Dying, Stabilized, Save, Fail, Misfire, and Concentrating are included. Flying 5, 10, 15, 20,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Keep the beasties away at night and create atmosphere with this set of Fire Poles for your campaigns.
These Fire Poles are hollowed out and can accept small led lights. Two are made to be used in grass or dirt settings and two are made to go with the "City Streets" set. ... [click here for more] |
Fat Dragon Games |
$1.50
|
Included in this set of 5 remixed tiles from Fat Dragon Games Dungeons and Market set are everything you need to add curtain doorways to your games!
Please see the included ReadMe for print instructions.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are 4 new FDG remixes allowing for more complex room designs. The Curved T-Wall comes in 4 flavors: Vanilla, Torch, Ruins, and Dank Catacombs.
... [click here for more] |
Fat Dragon Games |
$1.99
|
Here are some basic cavern edges. They are short enough for overlapping cavern levels. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$1.99
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99
|
This Set includes the tavern base tile to create a trapdoor using either the metal frame and standard trapdoor (as pictured on the right) from the FDG Tower of Terror set* or using the wooden frame and hidden trapdoor included in this set (shown on the left).
The hidden trapdoor has hinges and a handle on only one side of the door so when flipped over it appears as a standard tavern floor.
*The... [click here for more] |
Fat Dragon Games |
$1.99
|
This is a set tile edge clips with a wooden texture on it that can be attached to any Fat Dragon Games standard sized tile as well as the Seperate Tavern Angled Walls A and B. This set does not include any tiles, just the clips. ... [click here for more] |
Fat Dragon Games |
$1.99
|
This is a collection of five webs, a nest full of eggs and a previous spider victim that can connect to a wall via a peg.
*Note, this set contains no tiles, but the webs are designed to fit on any standard Fat Dragon Games classic wall tile. The spider victim can connect to any wall, or post, with a peg hole in it. ... [click here for more] |
Fat Dragon Games |
$1.99
|
Dragonlock Dungeon 1x2 tile with Centered wall
Includes
1x2 Thick Wall
1x2 Thin Wall
1x2 Thin Wall - half height
Additional Releases:
Braziers and Parts to make them unique: Brazier Crafting Kit More Light covers: FDG Brazier Covers LED insert for braziers: LED Light Frame
... [click here for more] |
Fat Dragon Games |
$2.00
|
There are 7 new doors in this set that are compatible with FDG Castles and Towers of Terror.
-Solid Iron Door
-Distressed Solid Iron Door
-Barred Window Iron Door
-Distressed Barred Window Iron Door
-Barred Iron Door
-Distressed Barred Iron Door
-Broken Wooden Door
-Unique Hinge that works with these doors, and FDG doors
These doors will not fit on the regular FDG hinge, but the FDG doors... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this title are 12 remixed tiles for Fat Dragon Games Caverns Terrain.
4x4 Elevated Cavern Floor
4x4 Crater
4x4 Elevated Crater
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Ledged Rock
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Formation Rock
4x4 Water tile with Rock Formation
4x4 Water Tile with Ledged Rock
4x4 Water Tile with Rock Hut Bottom... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set is 20 custom remixed Caverns tiles for use with Fat Dragons Games Caverns Starter and Expansion set.
... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are three custom remixed Fat Dragon Games Dungeon Tiles. Add pools of nefarious and vile liquids to your dungeons. Your most fearsome evil wizards will thank you gleefully. Wonderful for pushing players into or goading into a swim with a failed perception check. These pools will make a great addition to any dungeon. To maximize the ulitility of this set, we suggest you also pick... [click here for more] |
Fat Dragon Games |
$2.00
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$2.00
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
This collection of 1 Inch Miniature Bases is perfect for matching with your own miniatures that need an outdoor, natural base.
Bases include Grass, Rough, Rocky, Snow, Dungeon, Cavern, Wood, and Cobblestone textured Bases.
Crafted upon request of community member @Olaf on the Fat Dragon Games Forums. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain.
Each one is mounted to DRAGONLOCK™ Ultimate bases for use with other Fat Dragon Games tiles!
... [click here for more] |
Fat Dragon Games |
$2.00
|
Chris Kelly requested these, so here are some variations of a 4x4 timber style floor, with either one edge cobblestone, a corner, or 3, 4 edge cobblestones. depending on demand, may be adding to this in the future.
print the same as a normal timber floor ... [click here for more] |
Fat Dragon Games |
$2.00
|
Shh! Did you hear that? I think there is something in that rubble over there!
Tremors in the Rubble contains 8 brand new tiles and 1 new loose debris for the Fat Dragon Games Dragonlock Dungeons. Each tile has a Before and After variant, so you can replace them when the players get close enough to attack (or make the perception check). Plenty of flat space to put treasure chests and other enticements,... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this free bonus to the Tycho City mega set is a battery powered tealight capable Airbender statue. Originally crafted by prolific thingiverse artist OrangeWine, this statue has been carved out to allow a tealight to shine through in multiple areas.
Airbender Display by tychocity on Sketchfab
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a remix for the Tower of Terror set for integrating into the Woodland Sets. This does not include the rest of the tower. It only includes the door and 4 tiles shown in the cover preview. Enjoy!
This requires the purchase of the FDG Tower of Terror set to complete tower.
Recommended Print Settings:
Use official FDG Printing Profiles
Layer Height: .2
Infill: 5% ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set includes an angled dungeon door base separate wall piece, two offset dungeon door base separate wall pieces and a custom dungeon lintal to fit these doors.
* This set does not include a door or the hinge to attach it to the bases, you will need to have purchased the Fat Dragon Games FDG0204 Dungeon Separate Wall set for these pieces. ... [click here for more] |
Fat Dragon Games |
$2.50
|
An expansion set for the posts of village buildings 1 and 2 with some pillars included this set contains wooden and stone Double posts in many different combinations as well as a Pillar for both wood and stone.
This set contains 20 variations of posts and pillars
This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$2.50
|
Three LED tiles for the Micro Dungeons set. Slip the bulb in, then the battery under the tile. Bend the wires around and put one on top, one on bottom. The flame and water swap out easily, so no need to print multiple bases, unless you want to. I print the bases at .2 with the FDG cura settings plus 3 walls, and the tops with the FDG mini cura profile. No supports needed, unless you are concerned with... [click here for more] |
Fat Dragon Games |
$2.95
|
This set of 4 dungeon to cavern transition tiles were made upon the request of the community and many of my patrons.
... [click here for more] |
Fat Dragon Games |
$2.99
|
Included in this set are 4 new Ruined Dungeon Walls and 2 new Ruined Dungeon Corners. Thank you to Tom for the FDG CC program that allows these wonderful remixes.
... [click here for more] |
Fat Dragon Games |
$2.99
|
It's about giant buildings folks. That's what it really comes down to. That's all that's left when we go to see our ancestors. The Busy Little Dwarves Design Bureau understands the need to work hard today to ensure a better tomorrow for our little ones. After all, what do we really leave behind for our children but unnecessarily tall structures with incredible, intricate, and impractical architecture.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A collection of 3d printable half sized dwarven wall and floor tiles requiring and made to compliment Fat Dragon Games Realm of the Mountain King set.
Includes all the files seen below. Use suggested settings from Realm of the Mountain King for printing.
... [click here for more] |
Fat Dragon Games |
$2.99
|
This is a set of castle floor pieces using the floor texture from the base of the FDG Tower of Terror set. This set includes two 1x2 floor tiles, a 2x2 floor tile, a 2x4 floor tile, a 4x4 floor tile and two 45 degree angle pieces.
Dragonbite clips can be found here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30 ... [click here for more] |
Fat Dragon Games |
$2.99
|
Choice Caverns includes 4 new 2x2 remixed cavern tiles and 1 oversized 4x6 Cavern Chasm. I made each of these for my patrons in October 2018, so it seems fitting to call them Choice. These were remixed from the Fat Dragon Games Revised Caverns terrain set. ... [click here for more] |
Fat Dragon Games |
$2.99
|
For when your dice just aren’t rolling high enough… or to transport them to and from the gaming session. Designed to fit the clear plastic case from Chessex Dice sets. Recommended settings can be found in the attached PDF.
Base remixed from Dice Plinth by zheng3, licensed under the Creative Commons – Attribution – Share Alike license.
Cage remixed from D&D Dice Cage by zheng3,... [click here for more] |
Fat Dragon Games |
$2.99
|
As a beginner painter I collected many different brands of paints. Unfortunately, most paint stations are made for just one size of paint pot and are limited to the number of paints it will hold.
The Dungeon Castle Paint Pot Holder is designed with 3 different sizes and use the DRAGONLOCK Ultimate Dragonbite Clip to connect as many as you need in any combination.
Extra small works well with Army... [click here for more] |
Fat Dragon Games |
$2.99
|
This is a remix of the dice tower from the GM Screen Of Doom. I added a cup/pen or pencil holder to the top. I also added a bottom and middle drawer option. One with a demon face and the other is plain stone. There is also a bottom and middle shelf option with a slight slant. You can mix and match shelves and drawers to make it the way you like.A link to the original file is at the bottom.
https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered... [click here for more] |
Fat Dragon Games |
$2.99
|
This set includes 2 Dragonbite tiles with tree stumps featuring either an axe or a two-man crosscut saw, 2 freestanding tree stumps with axe and saw and a pile of 2x2" pile of logs. The pieces were made using Fat Dragon Games models and items off of Thingiverse. Check the Read me file for more information.
For suggested print settings, check out the FDG Free Starter Set: https://www.drivethrurpg.com/product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set... [click here for more] |
Fat Dragon Games |
Pay What You Want
|