Title |
Publisher |
Price ▲ |
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Terry wanted one of these, so i took a crack at it. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Rural Roads
A collection of 3D tiles depicting rural roads suitable for your modern, post-apocalyptic, and sci-fi for RPG and tabletop games. Tiles are designed to be printed on FDM printers with 0.4mm nozzle using the Fat Dragon Games dungeon terrain Ender 3 profile. Road sections come with variants to accommodate traffic signs and stop lights.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
I needed a way to add variety to my cavern waterways. Included are two diagonal cut water tiles, one a bit more narrow than the other. Enjoy! ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A small collection of 3 inch tiles I made for Michael Potter. There are a couple of different lock options, so that if you needed a 15 foot wide hall, you can center a door at the end with the "4 lock" version. Alternatively, if you need to butt up against a 2x2 tile, you will want to use a "6 lock" option. There is also an experimental "8 lock" option on the 2x3 tile.
Included... [click here for more] |
Fat Dragon Games |
$1.00
|
This is a revised, retextured, and updated waterfall from the original legacy Wet Caverns Set. I did this waterfall specifically for the Cragmaw Hideout section of the Lost Mines of Phandelver. This model was one of my first big projects when I got into tile remixing. I made this using the original caverns walls, the water from Dungeon Expansion 5, and a whole lot of very careful stretching in meshmixer.... [click here for more] |
Fat Dragon Games |
$1.00
|
Someone asked me for this, so I made it, hopefully its not out there already. ... [click here for more] |
Fat Dragon Games |
$1.00
|
Fat Dragon Games has teamed up with Crafty Games to bring you the best terrain and models for your SPYCRAFT RPG. The Skyshark is an easy to build 28mm stealth helicopter perfect for SPYCRAFT or any other sci-fi or modern RPG.
This product requires Adobe Acrobat Reader (free download) to use.
... [click here for more] |
Fat Dragon Games |
$4.99 $1.25
|
This includes a large steam boiler, plus a shovel and sacks of coal. The boiler is sized so it can just barely fit inside of a house (though a larger structure or outside would make more sense). The sacks of coal could also be used for other produce, such as rice or other grains.
I'd recomend 15-20% infill for the boiler.
DRAGONBITE™ Community Creator model.
For suggested print settings,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are 4 new FDG remixes allowing for more complex room designs. The Curved T-Wall comes in 4 flavors: Vanilla, Torch, Ruins, and Dank Catacombs.
... [click here for more] |
Fat Dragon Games |
$1.99
|
Here are some basic cavern edges. They are short enough for overlapping cavern levels. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$1.99
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
This collection of 1 Inch Miniature Bases is perfect for matching with your own miniatures that need an outdoor, natural base.
Bases include Grass, Rough, Rocky, Snow, Dungeon, Cavern, Wood, and Cobblestone textured Bases.
Crafted upon request of community member @Olaf on the Fat Dragon Games Forums. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain.
Each one is mounted to DRAGONLOCK™ Ultimate bases for use with other Fat Dragon Games tiles!
... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this model are 8 9 models for Fat Dragon Games Dragonlock system. These 2" Separate Walls are available in the following flavors.
Alcove (added 9-24-18)
Cthulu Brain
Cobra
Eye Symbol (Pristine)
Eye Symbol (Ruined)
Web Crests
Spider Crests
Large Spider
5e Medal
Many thanks to the contributing artists who lent very wonderful textures under the lovely CC-AO License.Elazro,... [click here for more] |
Fat Dragon Games |
$2.00
|
The Winterhawk Cemetery brings an all new dimension to common flat 2D cemetery terrain with the addition of open, 3D graves you can place miniatures in! Layer options make it easy to customize your models before printing, swapping window sizes, adding snow to the ground tiles, and much more. This set includes: • Chapel • Mausoleum • Headstones (over 175 unique versions!) • 4" hedge fence... [click here for more] |
Fat Dragon Games |
$9.99 $2.50
|
Included in this set are 4 new Ruined Dungeon Walls and 2 new Ruined Dungeon Corners. Thank you to Tom for the FDG CC program that allows these wonderful remixes.
... [click here for more] |
Fat Dragon Games |
$2.99
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
Durty roads for Lou Anders. Straight, Curvy, fourway, and threeway versions of durty and snowy roads. Also including a durty to brick transition tile. Print at .1-.2, with 0-10% infill. ... [click here for more] |
Fat Dragon Games |
$3.50
|
E-Z BATTLEFIELDS is designed to provide beautiful, affordable tabletop terrain for your next wargame. This 15mm bridge set feature incredibly detailed card models that have user selectable graphic options, allowing you to customize each piece before printing. All bridge pieces lock together using common bobby pins to allow you to expand or decrease the size of the bridge as required. PLEASE NOTE... [click here for more] |
Fat Dragon Games |
$4.99 $3.74
|
E-Z BATTLEFIELDS is designed to provide beautiful, affordable tabletop terrain for your next wargame. This 15mm trench set feature incredibly detailed card models that have user selectable graphic options, allowing you to customize each piece before printing. Sandbags, wood reinforcements, rifles leaning against the wall, etc. can all be turned on or off as you desire. Also, all trench pieces... [click here for more] |
Fat Dragon Games |
$4.99 $3.74
|
Asian Altars, Pillars, and Basins is a Fat Dragon Games Dragonbite Community Creator set with 17 brand new .stl files to add an oriental theme to your games.
The full list of files includes:
2x2 Asian Floor
2x2 Pool Tile (Asian and FDG Dungeon floors)
2x2 Spiral Dais (Asian and FDG Dungeon floors)
Dragon Pillars (Left and Right)
Dragon Basins (Left and Right)
Torii Shrine for Gong
Dragon... [click here for more] |
Fat Dragon Games |
$3.99
|
Glad tidings are here! No more shall the long-suffering GMs of this world toil with no escape. Never again shall they be forced to endure session after session of murder-hobo antics. Now, no matter what Fat Dragon Games dungeon your players have seen fit to debase, you'll have the solution. “Rocks Fall, Players Die” is the newest and last Community Creator set you’ll need for... [click here for more] |
Fat Dragon Games |
$3.99
|
This set of 3D-printable space tiles complements the existing Spaceships 1 and Spaceships 2 line of Terran ship tiles, and the Alien Spaceships and Alien Invasion sets of alien ship tiles. It includes several custom STL models for each, expanding the options available for both alien and terran ships.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother... [click here for more] |
Fat Dragon Games |
$3.99
|
Here are a few LED options to go with the cavern deck system. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Decks LED Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
Though there are a number of watery sets -- indoor, outdoor, and underground -- it seems a little boring to have just plain water tiles “in the middle.” This set of 3D-printable STL models spices up a river or lake with some wreckage that might suggest past (or future!) events. Kraken not included.
Note: there are two styles of water tiles in the Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$4.99
|
1st Class Transitions is a set of remixed tiles by Will Walker and Marc Weatherhogg. Patrons of Aether Studios requested more FDG Transitions, and we LOVE to make them. Included in this set you'll find 33 .STL files for mixing between FDG terrain sets.
... [click here for more] |
Fat Dragon Games |
$5.99
|
This set includes 15 prison bar tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
Tiles with bars along the edge of the base (straight, corner, doorway, etc.)
Tiles with bars across the center of the base (straight, corner, intersections, doorway, etc.)
Dungeon Wall tiles with bars coming out (along both center and edges) and with bars along opposite edge
All... [click here for more] |
Fat Dragon Games |
$5.99
|
The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps. Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing? This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t... [click here for more] |
Fat Dragon Games |
$5.99
|
Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set. However, all the water areas are now completely flat. That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned... [click here for more] |
Fat Dragon Games |
$5.99
|
This Barn set contains models by several of us who were active on the FDG forums for many months, in particular Arenwel, Colin, Aaron, and I. It was a wonderful time of learning for us and Arenwel was a wonderful instructor. He and Colin were the primary artists on this set, and we hope you all of the hard work and effort that went into this set.
Other sets often used for Barn Construction:
FDG Village... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
CAPITAL CITY brings a visually stunning urban environment to your tabletop. This building expansion set includes three new building styles that fold flat when not in use for easy storage, with stackable uptions that allow you to build them as tall as you want, detachable balconies, a clocktower, a junker car, and much more. Most files include user selectable graphic options, allowing you to customize... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
Expand the Cavern Decks set with these edge pieces! This set is perfect for making deck overhangs and transitions. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Deck Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$7.99
|
The Chasm series is back with a new update! Rickalias Ebborts took the lead on crafting up these very special remixes for the community. Expand your chasms into cavernous canyons with rock bridges or utilizing some of the Natural Bridge options. You can see all the tiles included in this set below. The large tile on the left is used to support a larger base of tiles above it.
Recommended... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe.
Shown with models from others sets: Door... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of 3D printable STL models provides roofs for small houses, such as the buildings in the port village in the Kobold Docks map by Dyson Logos. This includes a pyramid-shaped roof for 4x4" buildings, and 2" roofs for small C, L, or T shaped buildings. These roofs can be used in conjunction with a number of FDG village sets, though the models are based on the roofs from... [click here for more] |
Fat Dragon Games |
$7.99
|
This set lets you make the Red Queen's garden. It includes all the pieces you need to make a hedge maze with or without roses. Also has modified fence pieces, a decortative heart bush, and paint can with brush.
The Village Cemetery set is needed to complete the fence
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are 26 tiles for expanding your catacomb dungeons. Compatible with all other Fat Dragon Games terrain.
... [click here for more] |
Fat Dragon Games |
$8.99
|
Like the core Flooded Dungeons set, this 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set adds new ways to connect your flooded dungeons to caverns and dry dungeons, as well bringing in a mid-corridor doorway and pipe walls to increase the,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with a wavy water texture built into the models,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2: Wavy Walls set and expansion Wet Cavern 2: Wavy Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with flat water areas... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain was inspired in part by the introductory 5e Lost Mine of Phandelver adventure. One cavern in that adventure has bushes outside and a stream flowing out through the entry. Another area features a 500 year old cave, recently reopened for mining by new adventurers. These kind of settings suggested some of the cave entries you’ll find here.
Sample layouts:... [click here for more] |
Fat Dragon Games |
$9.99
|
I am really excited about this set. It includes planks, stairs, and ladders for the cavern deck sets, but most of all the bridges! Rope bridges of varying lengths, and perhaps the most exciting, diagonal bridges. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Bridges & Accessories
Recommended print settings are to use the FDG terrain profile at .12 layer height or better,... [click here for more] |
Fat Dragon Games |
$9.99
|
I am excited to share this set! I wanted to create a variation to the existing narrow cavern tiles. These narrow passages are a bit more accessible and easier for players to see the battlefield. It includes, 45 degree, Y and X intersections to create a more interesting cavern path in additional to the traditional intersection tiles. I added some elevation passage tiles as well as a bridge that sits... [click here for more] |
Fat Dragon Games |
$9.99
|
Are you sick and tired of never being able to represent the dragons hoard like you want? I am really excited to share this set! This is the Cavern Treasure set that has all you need, but is recommended to pair with the Core Treasure Set for larger troves!
This set includes 62 unique tiles! With such a huge variety of floor and wall tiles, the possibilities are endless!
I recommend printing in .1... [click here for more] |
Fat Dragon Games |
$9.99
|
The elevated wet cavern deck set adds a fantastic multi-level deck experience to any cave. Check out the preview below and enjoy!
Set Preview:
:lang="en">Elevated Wet Cavern Decks Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$9.99
|
A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers.
Note that the walls and posts here... [click here for more] |
Fat Dragon Games |
$9.99
|
I am happy to offer this cavern deck expansion. This set includes all the tiles necessary to run decks along the waterline and over the water. This set can easily double as a dock set. Check out the preview below and enjoy!
Set Preview:
:lang="en">Wet Cavern Decks
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well.... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between! Compared to full-height cavern pieces, these lower wet corridors are:
Faster to print
Easier to see over
Easier to place miniatures close to -- especially important for tight corridors!
These corridors work well with both half-height... [click here for more] |
Fat Dragon Games |
$9.99
|